Festo Smart cubic CPVSC1-VI, Manual

Page: 61 / 92

4. Commissioning
4−11
Festo P.BE−CPVSC−E N en 0301a
Caution
Before commissioning your machine/system:
·
Make sure that double−solenoid valves (Ident. code J)
are in their basic positions again. To do this actuate
manual override 12 of the relevant valve or apply current
to pilot solenoid 12.
·
Bring the locking manual override actuations into the
basic position again.
In this way you will avoid undefined switching states when
commissioning the machine/system.
Actuating the manual override with stop (locking) Reaction of the valve
Use a screwdriver to carefully
press down the plunger of the
manual override as far as
possible. Then turn it 90° in a
clockwise direction. The valve
moves to the switching
position
Leave the plunger in the lower
position. remains in the switch
position
Then turn it 90° in an anti−
clockwise direction. Then
release the plunger. moves back to the basic
position (not with 5/2−way
double−solenoid valve,
Ident. code J)
Tab.4/6: Locking manual override