Festo Smart cubic CPVSC1-VI, Manual

Page: 45 / 92

3. Installation
3−15
Festo P.BE−CPVSC−E N en 0301a
3.3.4 Connecting the pneumatic tubing
Please note
·
Connect the work lines as follows, depending on the tool
you are using:
Screw connector with hexagon socket head:
any sequence is possible.
Screw connector with external hexagon socket head:
connection must be made from left to right (space for
wrench).
The double−solenoid valve (Ident. code J") consists
of two components, the control valve" and the
work valve." Each valve has its own housing. The
control valve is situated to the left of the work
valve" and does not have work connections.
·
Seal all connections not required for the functioning of
the CPV−SC valve terminal with blanking plugs.
Fit the screw connector or the silencers according to the table
below. Then connect the pneumatic tubing.