Festo CPX-FB32, Electronic Manual

Page: 110 / 136

B. Ethernet/IP Objects of the CPX−FB32
B−20
Festo P.BE−CPX−FB32−EN en 0605NH
B.4.4 Diagnostic Trace Object
Object class: 134
Instances: 1...40
An instance is created for each diagnostic entry.
A tt r.
n o.
A ccess D esi g nati o n D esc r i p ti o n Typ e F uncti o n n o.
3488 + n
1)
1 Get Marking the first entry after
Power on
Supplies 1 if it is the first
entry after Power on. BYTE n = 10 * d + 4
(bit 7)
2 Get Days Number of days
2)
BYTE n = 10 * d + 0
3 Get Hours Number of hours
2)
BYTE n = 10 * d + 1
4 Get Minutes Number of minutes
2)
BYTE n = 10 * d + 2
5 Get Seconds Number of seconds
2)
BYTE n = 10 * d + 3
6 Get Milliseconds Number of 10 msec
2)
BYTE n = 10 * d + 4
(bit 0...6)
7 Get Module code
3)
Module code of the module
which registered the fault. BYTE n = 10 * d + 5
8 Get Module number Module position of the
module which registered the
fault; 63 = fault not
module−related BYTE n = 10 * d + 6
(bits 6, 7)
9 Get Channel
number
3)
Number of the first faulty
channel BYTE n = 10 * d + 7
(bit 0...5)
10 Get Fault number Possible fault messages see
System Manual chapter 5. BYTE n = 10 * d + 8
11 Get Subsequent
channels
3)
Number of subsequent
channels with the same fault BYTE n = 10 * d + 9
1)
d (diagnostic event) = 0...39; most current diagnostic event = 0
2)
Measured from the moment the power supply is switched on
3)
If the fault number = 0, the contents are also 0. If the fault number lies between 128...199
(fault class 3), the contents are not relevant (servicing required).