Festo CPX-FB32, Electronic Manual

Page: 51 / 136

2. Commissioning
2−17
Festo P.BE−CPX−FB32−EN en 0605NH
Example terminal
3modified The next diagram shows with terminal 3 as an example
(seeFig.2/3) the effects of modifications to the address
assignment.
The following has been changed:
The status bits have been deactivated.
In the case of module no. 1 an 8−input module has been
replaced by a 16−input module.
The pneumatic interface has been set to 16 O, in order to
reserve addresses for an extension to the pneumatics.
1 2
16DI 8DI 4DO 8DI 2AO
3
8DO
16 O
Module no.: 0 1 2 3 4 5 6
1
Modified: Status bits deactivated
2
Modified: 8 DI module replaced by
16DI module
3
Modified: Pneumatic interface (now set
with DIL switch to 1...16 valve coils)
Fig.2/4: Example terminal 3 after extension/conversion (compare with Fig.2/3)