Festo CPX-FB32, Electronic Manual

Page: 60 / 136

2. Commissioning
2−26
Festo P.BE−CPX−FB32−EN en 0605NH
2.3 P a r amet r i z in g
Cauti o n
A different parametrizing will result in a different reaction.
Check especially when replacing CPX terminals to see
which settings are necessary and make sure that these are
restored (e.g. in the start−up phase by the higher−order
PLC/IPC).
The CPX terminal is supplied from the factory with preset
parameters.
The system reaction of the CPX terminal can be adapted to
the relevant application. You can set the reaction of the CPX
terminal as well as the reaction of individual modules and
channels by parametrizing. A distinction is made between the
following parametrizings:
System parametrizing, e.g.: Switching out fault messages,
setting reaction times, etc.
Module parametrizing (module and channel−specific),
e.g.: Monitoring, settings in the event of faults, settings
for Forcing.
Parametizing the diagnostic memory.
A detailed description of the individual parameters as well as
basic information on application can be found in the CPX sys
tem manual (P.BE−CPX−SYS−...).
The module parameters which are available for the various
modules can be found in the manual for the relevant module
(e.g. manual for CPX pneumatic interfaces and CPX I/O mod
ules (P.BE−CPX−EA−...).