Festo CPX-FB32, Electronic Manual

Page: 63 / 136

2. Commissioning
2−29
Festo P.BE−CPX−FB32−EN en 0605NH
2.3.2 Parametrizing via Configuration Assembly (method 1)
With parametrizing via the Configuration Assembly the para
meters must be entered individually in the control program or
generated via software.
Parametrizing via the Configuration Assembly is available
only as from revision status later than Rev. 1.10.
Further information on creating the Configuration Assembly
can be found under
www.f est o. c o m /f ie ldb us .
2.3.3 Parametrizing via software (method 2a)
With the CPX Maintenance Tool (CPX−MT) you can parametrize
the CPX terminal via Ethernet with a PC.
The CPX−MT is available in Internet under:
www.festo.com/fieldbus
2.3.4 Parametrizing with the Handheld (method 2b)
The Handheld offers menu−orientated access to parametrizing
without configuration software.
Information on operating the Handheld can be found in the
relevant manual.
Pl ease n o te
The last parametrizing received in the CPX terminal is
always valid.
The CPX terminal can only be parametrized if the system
parameter System start" has the setting System start with
default parametrizing and current CPX system equipment".
In this case, the standard parameter settings are valid in the
CPX terminal after Power On.