Festo CPX-FB32, Electronic Manual

Page: 61 / 136

2. Commissioning
2−27
Festo P.BE−CPX−FB32−EN en 0605NH
Prerequisites for parametrizing
With the system parameter System start" you can influence
the starting reaction. If possible select the setting System
start with default parametrizing and current CPX system
equipment". The desired parametrizing can then be carried
out in the initialisation phase or user−controlled (depending
on the field bus used).
Pl ease n o te
The CPX terminal can only be parametrized if the system
parameter System start" has the setting System start
with default parametrizing and current CPX system
equipment".
If the M LED lights up permanently after the system start,
then System start with saved parametrizing and saved CPX
system equipment" is set. In this case, no other parametriz
ing can be carried out.
Cauti o n
In the case of CPX terminals on which the M LED lights up
permanently, the parametrizing will not be restored auto
matically by the higher−order system if the CPX terminal is
replaced during servicing. In these cases, check before
replacement to see which settings are required and carry
out these settings.