Festo CPX-FB32, Electronic Manual

Page: 30 / 136

1. Installation
1−14
Festo P.BE−CPX−FB32−EN en 0605NH
1.3.3 Setting the IP address
There are three possibilities of setting the IP address of the
CPX−FB32.
Pl ease n o te
If the network settings of the CPX−FB32 are modified, the
Modify LED M" will flash yellow:
·
Start the CPX−FB32 again in this case with Power
OFF/ON.
Dy namic a ddr essin g v ia BOOTP/DH C P
Factory setting In the factory setting all switch elements of DIL switch 3 are
set to OFF and BOOTP/DHCP is activated in the CPX−FB32.
The dynamic addressing via BOOTP/DHCP is then set
(seeTab.1/4).
For the dynamic addressing there must be a BOOTP/DHCP
server in the network.
If you wish to change from another type of addressing back to
dynamic addressing:
1. Set all switch elements of DIL switch 3 to OFF
(seeTab.1/4).
2. Activate DHCP with the Handheld (CPX−MMI) or with the
program BOOTP−DHCP Server" from Rockwell Automa
tion.
U se t h e net work settin g sa v e d in t h e C P X −FB32
The CPX−FB32 offers the possibility of saving the network
settings in a non−volatile memory. DHCP/BOOTP is thereby
deactivated.
1. Set all switch elements of DIL switch 3 to OFF
(seeTab.1/4).