Festo CPA-SC Series, Manual

Page: 7 / 140

Contents and general instructions
V
Festo P.BE−CPASC−EN en 0808c
Designated use
The CPA−SC valve terminals or CPA−SC individual location
base blocks described in this manual are intended for fitting
into a machine or automated system. It is absolutely
necessary to observe the safety instructions in this manual as
well as the designated use of the relevant CPA−SC valve
terminal or CPA−SC individual location base block. The CPA−SC
valve terminals or CPA−SC individual location base blocks may
only be used as follows:
as designated in industrial applications
without any modifications by the user. Only the conver
sions or modifications described in the documentation
supplied with the product are permitted.
In perfect technical condition.
When used together with commercially available compo
nents, such as actuators, the specified limits for pressures,
temperatures, electrical data, torques etc. must be observed.
National and local safety regulations must also be observed.
Standards and test values, which the product must observe
and fulfil, can be found in the section Technical specifica
tions". The product−relevant EU directive can be found in the
conformity declaration.
Certain configurations of the product have been approved by
the Underwriters Laboratories Inc. (UL) for the USA and
Canada. These configurations are marked as follows: