Festo CPA-SC Series, Manual

Page: 31 / 140

1. Summary of components
1−15
Festo P.BE−CPASC−EN en 0808c
The table below shows the max. number of valve locations on
the CPA−SC valve terminal variants:
Valve terminal CPA−SC Max. number of valve locations
HC
connection
PI
connection
MP
connection
FL
connection
DI
connection
With the use of valve plates
which are each fitted with only
one valve coil
1) 1)
20 20 24
2)
With the use of valve plates
which are each fitted with two
valve coils
1) 1)
10 10 16
Maximum number of valve coils
which can be actuated 32 32 20 20 32
1)
On CPA−SC valve terminals with HC or PI connection the maximum number of valve locations is
limited by the base block to 16 locations.
2)
With this CPA−SC valve terminal with DI connection the first 8 valve locations support the control of
two valve coils. Further details on fitting equipment on the valve terminal can be found in the
Electronics Manual for the CPA−SC.
Tab.1/10: Maximal number of valve locations