Festo CPA-SC Series, Manual

Page: 108 / 140

5. Maintenance and conversion
5−6
Festo P.BE−CPASC−EN en 0808c
5.3 Replacing CPA−SC components
Components on valve locations can easily be replaced for
maintenance and conversion work.
The following components are available:
valve sub−bases with one valve solenoid coil
(Ident. code: M and X)
valve sub−bases with two valve solenoid coils
(Ident. code: B, E, G, I, J, K and N )
blanking plate
Note
Valve locations on the CPA−SC series are suitable for
controlling either 1 or 2 valve solenoid coils.
Check how many valve solenoid coils the relevant valve
location supports:
If you wish to replace a blanking plate with a valve
sub−base with two valve solenoid coils.
If you wish to replace a valve sub−base with one valve
solenoid coil with a valve sub−base with two valve
solenoid coils.
CPA−SC valve terminal with MP, FL or DI connection
The number of valve solenoid coils which can be controlled on
one valve location depends with this connection variant on
the total number of valve locations.
CPA−SC valve terminal with MP or FL connection:
Instructions on addressing can be found in the
Brief description" P.BE−K−CPASC.
CPA−SC valve terminal with DI connection:
Instructions on addressing can be found in the
Electronics manual" P.BE−CPASC−CPVSC−DN−...