Festo CESA-GW-AS-CO, Installation And Operation Manual

Page: 37 / 83

CESA-GW-AS-CO Description
37
6.8 SETUP (configuration of an AS-i network)
Main menu || SETUP ||
In the "Setup menu", the following sub-menus are available:
6.8.1 AS-I SLAVE ADR. (set/change slave address)
Main menu || SETUP || AS-I SLAVE ADDR ||
This function is used to change the address of a slave.
To assign a new address to a slave, the menu entry "OLD ADDRESS" and then
the slave to be changed must be selected. The new address of the slave can be
set in the menu item "NEW ADDRESS". The address change is performed by
pressing the OK button.
AS-I SLAVE ADDR
FORCE OFFLINE
OPERATION MODE
STORE ACT CFG
PERMANENT PARAM
PERMANENT CFG
ADDR.ASSISTANT
LOS
AUTO ADDR. ENABLE
FACTORY RESET
AS-I SLAVE ADDR: set/edit AS-i slave address
FORCE OFFLINE: switch AS-i master to offline operation
OPERATION MODE: operation mode
STORE ACT CFG: store current configuration
PERMANENT PARAM permanent parameters
PERMANENT CFG: permanent configuration data
ADDR.ASSISTANT: address assistant
LOS: list of offline slaves
AUTO ADDR. ENABLE: auto addressing enable
FACTORY RESET: reset to factory settings
AS-I SLAVE ADDR.
OLD ADDRESS 21A
NEU ADDRESS 03B