Festo CESA-GW-AS-CO, Installation And Operation Manual, Page: 42 / 83

CESA-GW-AS-CO Description
42
6.8.10 FACTORY RESET (factory default settings)
Main Menu || SETUP || FACTORY RESET ||
This function can be used to reset the master to the factory default settings. The
“Reset” is done by selecting menu point DO RESET.
6.9 IO + PARAM.TEST
Main menu || IO + PARAM.TEST ||
The following warning message will be displayed before entering this menu:
Pressing the OK button continues with the actual test, ESC cancels the process.
The menu "IO + Param.Test" offers the following sub menus:
FACTORY RESET
DO RESET
Warning!
This function should be used only in emergencies, since all previously set attributes are
set back to the factory setting and ,thus, secure communication and operation of the
masters with the AS-i network is no longer guaranteed.
Master and AS-i network have to be reconfigured after a successful "Reset".
For double masters the "Reset" acts on both AS-i masters!
WARNING: OUTPUTS
MAY BE SET AND
HOST MAY LOSE
CONTROL OVER
THE AS-I MASTER.
BINARY INPUTS
BINARY OUTPUTS
ANALOG INPUTS
ANALOG OUTPUTS
PARAMETER
BINARY INPUTS: State of the binary inputs
BINARY OUTPUTS: State of the binary outputs
ANALOG INPUTS State of the analog inputs
ANALOG OUTPUTS: State of the analog outputs
PARAMETERS: Value of the current AS-i parameter