4. Commissioning information
60
Festo GDCC-CECX-K-D1-EN en 0802a
Display during start-up of the application
The system goes into INIT status once the firmware has booted. If the autoload option is
set to 1 in the configuration, start-up is automatically continued until the STOP operating
status. If the autostart option is also set to 1, start-up is automatically continued until the
RUN operating status.
Information on the configuration used can be found in the system
description for the diagnostic module.
Display
Step
9
INIT: The application is not loaded and the memory is enabled.
10
Loading the application into the memory.
11
STOP: The application is loaded, but is not yet being processed.
12
Starting the application.
13
RUN: The application is running.
Table 4.2 Display during start-up of the application
