![background image](http://html1.mh-extra.com/html/femi/dp-12-941/dp-12-941_manual_551483025.webp)
English ▪ 25
INSTRUCTION MANUAL - TRANSLATION OF THE ORIGINAL INSTRUCTIONS
12.
Troubleshooting
FAULT
CAUSE
INTERVENTION
The motors do not start
▪
No power supply voltage.
▪
Disconnecting devices are “OFF”.
▪
One or more emergency/safety
systems enabled.
▪
Fuse tripped or faulty circuit breakers.
▪
Buttons not working.
▪
Check and restore power supply.
▪
Turn the disconnecting devices “ON”.
▪
Reset the emergency systems and
check their efficiency.
▪
Replace the tripped fuses and check
the condition of the circuit breakers.
▪
Check efficiency of the START
buttons.
Noisy operation
▪
Incorrect belt tensioning.
▪
Dry shaft.
▪
Loose chuck pulley.
▪
Loose motor pulley.
▪
Adjust tensioning.
▪
Lubricate the shaft.
▪
Check tightness of retaining nut on
pulley.
▪
Tighten locking screws in pulleys.
Drill bit burns
▪
Insufficient speed
▪
Chips not coming out of hole
▪
Blunt drill bit
▪
Feeding speed too slow
▪
Drill bit not lubricated
▪
Change speed.
▪
Extract drill bit frequently to clear
chips.
▪
Sharpen the drill bit.
▪
Increase feeding speed.
▪
Lubricate the drill bit.
Excessive vibrations
▪
Worn shaft bearings
▪
Drill bit not correctly installed in the
chuck
▪
Chuck not correctly assembled
▪
Replace bearings.
▪
Install drill bit correctly.
▪
Install the chuck correctly.
Sliding sleeve returns too
slow or too fast
▪
Spring is not tensioned correctly
▪
Adjust spring tension.
Chuck will not stay attached
to shaft and falls off when
trying to install it
▪
Dirt or oil on the tapered inside surface
of chuck or shaft
▪
Use a household detergent to clean
the tapered surfaces of the chuck and
shaft to remove all dirt, grease and oil.
Summary of Contents for DP 12-941
