of the vehicle. The switch 9 LED illuminates and the
row of LED’s under the V-shaped display simulates
the light pattern being executed by the directional
signal. Press switch 9 again to deactivate the left
arrow directional signal and extinguish the switch 9
LED.
10. Switch 10 (SignalMaster
CENTER OUT).
Press switch 10 to activate a center out
directional signal directing traffic around both sides
of the vehicle. The switch 10 LED illuminates and
the row of LED’s under the V-shaped display simu-
lates the light pattern being executed by the direc-
tional signal. Press switch 10 again to deactivate the
center out directional signal and extinguish the
switch 10 LED.
11. Switch 11 (SignalMaster
ALTERNATE).
Press switch 11 to activate an alter-
nating flash pattern(four lamps in the center, then
two outer lamps on both sides). The switch 11 LED
illuminates and the row of LED’s under the V-shaped
display simulates the light pattern being executed by
the directional signal. Press switch 11 again to
deactivate the alternating flash pattern and extin-
guish the switch 11 LED.
12. Switch 12 (SignalMaster RIGHT).
Press switch 12 to activate a right
arrow directional signal directing traffic around the
right side of the vehicle. The switch 12 LED illumi-
nates and the row of LED’s under the V-shaped
display simulates the light pattern being executed by
the directional signal. Press switch 12 again to
deactivate the right arrow directional signal and
extinguish the switch 12 LED.
F.
Keyboard Configuration 7
(CLEARBOARD).
NOTE
Refer to figure 1-6 while reading paragraph
1-6.F.
1.
Switch 1 (RESET).
Press this switch to extinguish all
lights (if activated) in the lightbar. The RESET LED
will illuminate and the reflectors rotate to the “home”
Figure 1-6. Keyboard Configuration 7.
1-11
position. All other LED’s will extinguish and acti-
vated functions will deactivate.
NOTE
The RESET switch may be pressed at any time
to deactivate any previously selected function(s).
2.
Switches 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
and 12.
In this keyboard configuration, these
switches are not assigned functions. The installer/
programmer MUST inform you which functions are
assigned to the switches.
G.
Keyboard Configuration 8 (DEMO).
WARNING
Property damage, serious injury, or death to
you, to passengers, or to others may result
from improper warning system use.
DO NOT
use this keyboard configuration for warning
system activation.
See figure 1-7. This keyboard configuration
is intended ONLY for sales demonstrations and NOT
for emergency vehicle warning system applications.
Figure 1-7. Keyboard Configuration 8.
RESET
2
3
4
5
6
7
8
9
10
11
12
1 - Reset
2 - No function assigned
3 - No function assigned
4 - No function assigned
5 - No function assigned
6 - No function assigned
7 - No function assigned
8 - No function assigned
9 - No function assigned
10 - No function assigned
11 - No function assigned
12 - No function assigned
RESET
2
3
4
5
6
7
8
9
10
11
12
1 - Reset
2 - SignalMaster "step through"
3 - Pattern #35
4 - Pattern #56
5 - Pattern #28
6 - Pattern #42
7 - Pattern #26
8 - Pattern #63
9 - Pattern #86
10 - Pattern #76
11 - Pattern #83
12 - Pattern #87
Note: This keyboard configuration is for demonstration purposes ONLY.
Summary of Contents for VISION
Page 2: ......
