Figure 2-5. SignalMaster Patterns.
8
1
4
7
2
3
6
3
2
5
4
1
4
5
1
3
6
2
2
7
3
1
8
4
1
2
1
1
2
2
8
1
2
3
4
5
6
7
1
8
7
6
5
4
3
2
4
4
3
2
1
1
2
3
2
2
2
1
1
1
1
2
Driver
Side
Passenger
Side
Left Arrow
Right Arrow
Center Out
Alternating 1
Alternating 2
Alternating 3
Step Through
2-5
with pattern #46, no SignalMaster pattern, auxiliary
relay C activation, and push-on/push-off operation.
e.
Press the Reset/Save switch to
save this configuration. The control head display will
indicate the last switch configured. Therefore, switch
6 LED is illuminated.
f.
To exit Level 2 Configuration,
press the Reset/Save switch a second time.
g.
Press the Reset/Save switch a
third time to exit the configuration mode. A longer
beep will sound and the Reset/Save LED will change
from flashing to steady illumination indicating the
system is ready for use.
h.
Press switch 6 and ensure that
auxiliary relay output C was added to the configura-
tion. Proceed to Change 4 below.
5.
Change 4—add a SignalMaster pat-
tern to Mode 2.
a.
Enter the configuration mode as
described in paragraph 2-2.A.
b.
Press switch 10 to enter Level 2
Configuration mode. A beep is heard and the Reset/
Save LED will be flashing. The two options now
available are: pressing the switch to be reconfigured,
or pressing the Reset/Save switch to save the current
configuration and exit Level 2 Configuration mode.
c.
Press switch 7. See figure 2-4.
The control head display will indicate that switch 7 is
configured with pattern #26, no SignalMaster pat-
tern, auxiliary relay C activation, and push-on/push-
off switch operation.
d.
Press switch 10 to add a Signal-
Master pattern to the switch 7 configuration. Con-
tinue to press switch 10 until the desired SignalMas-
ter pattern (see figure 2-5) is displayed. The control
head display now indicates that switch 7 is config-
ured with pattern #26, a SignalMaster pattern,
auxiliary relay C activation, and push-on/push-off
switch operation.
e.
Press the Reset/Save switch to
save this configuration. The control head display will
indicate the last switch configured. Therefore, switch
7 LED is illuminated.
f.
To exit Level 2 Configuration,
press the Reset/Save switch a second time.
g.
Press the Reset/Save switch a
third time to exit the configuration mode. A longer
beep will sound and the Reset/Save LED will change
from flashing to steady illumination indicating the
system is ready for use.
h.
Press switch 7 and ensure that it
is now configured with the desired SignalMaster
pattern. Proceed to Change 5 below.
6.
Change 5—change Mode 3 pattern
from #27 to #35.
a.
Enter the configuration mode as
described in paragraph 2-2.A.
b.
Press switch 10 to enter Level 2
Configuration mode. A beep is heard and the Reset/
Save LED will be flashing. The two options now
available are: pressing the switch to be reconfigured,
or pressing the Reset/Save switch to save the current
configuration and exit Level 2 Configuration mode.
c.
Press switch 8. See figure 2-4.
The control head display will indicate that switch 8 is
configured with pattern #27, no SignalMaster pat-
tern, auxiliary relay C activation, and push-on/push-
off switch operation.
Summary of Contents for VISION
Page 2: ......
