Fayat DYNAPAC CT3000, Instruction Manual

Page: 66 / 108

Maintenance
– Daily (Every 10 hours of operation)
62 4812325559EN 2018-02-20
Check the scrapers adjustment
Assure that the scrapers are in good operational condition,
otherwise, replace them.
If adjustment is needed, follow in the following manner:
1. Release the fixing bolts (1) from the scrapers bar, not
completely.
2. Adjust the scraper so that its distance relevant to the
cylinders stays among 1" (approx. 25 mm).
NOTE:
Use a bar with a 1” diameter (approx. 25 mm) to assist
on adjustment.
3. Tighten the fixing bolts again (1) with the following torque
values:

M20: 383 lb.ft (520 N.m) (dry) / 346 lb.ft (470 N.m)
(greased)

M16: 199 lb.ft (270 N.m) (dry) / 177 lb.ft (240 N.m)
(greased)
Fig.
– Adjustment of the scraping bars.
1