![Fayat DYNAPAC CT3000 Instruction Manual Download Page 36](http://html.mh-extra.com/html/fayat/dynapac-ct3000/dynapac-ct3000_instruction-manual_546865036.webp)
Before starting the engine
32
4812325559EN
2018-02-20
Interlock
The machine is equipped with interlock.
The diesel engine will shut down after 4 seconds if the operator
leaves the seat during the operation.
If the parking brake is activated, the diesel engine does not stop.
The engine will be shut down automatically if, for any reason,
the transmission is not in the neutral position when the operator
is not seat in the place.
Always keep seated in all operations!
Alignment of the cab cushions
The alignment of the cab cushions is performed through
applying compressed air in the four valves located in the
cushions, below the cab.
NOTE
: A compressor with a capacity of 50 psi is enough for the
job.
The application of compressed air in the valves is only
performed when it is noticed the misalignment in the four scales,
located besides every cushion, and also in the cab.
1.
Park the machine on a completely flat surface, shut off the
engine and the main switch.
2.
Check if the arrow in the scales is aligned with the number
ZERO, in the 4 cushions.
NOTE:
The adjustment is at real time, or in others words, when
a cushion is inflated of deflated, the other cushions are affected
as well.
3.
Apply compressed air in the valves or deflate the cushions
crossed, according to the scale, starting from the front right
side, then going to the rear left side, posteriorly, to rear right
side and finally finishing the checking on the front left side.
Fig.
– Cushion valve
Fig.
– Alignment scale
Fig.
– Cab opened
Summary of Contents for DYNAPAC CT3000
Page 2: ...2 4812325559EN 2018 02 20 ...
Page 4: ......
Page 107: ...2018 02 20 4812325559EN 103 ...