Safety
– General instructions
2
4812325559EN
2018-02-20
Safety - General instructions
(Read also the Safety Manual)
1.
Read and understand this Manual before starting the engine and operating the
machine. The operator should be completely familiarized with the machine before
usage.
2.
Observe and follow all the instructions of lubrication and maintenance contained
in the Maintenance Manual.
3.
Do not operate the machine if you are not qualified, by training or experience.
NEVER allow passengers and always operate the machine seated.
4.
Do not operate the machine if it needs repair or adjustments.
5.
When entering or exiting the machine, use the stairs and the handrail. NEVER enter
or exit the machine while moving.
6.
In the case of the ground stability is irregular or dangerous, use the Roll Over
Protective Structure (ROPS). Always use the seat belt with ROPS cabs.
7.
In closed turns, maintain the lowest speed possible.
8.
Avoid moving near cliffs or locations with high side inclination. Operate the
machine in low speed and always check the functionality of the brakes.
9.
Beware of obstacles above your head. Always look up and down.
10. Take special attention when operating on rough terrain. Never exceed the speed
of 12.4 mph (20 km/h).
11. Obey all the safety rules and use the proper protection equipment according to
the work that will be done.
12. Maintain the machine always clean. Clean immediately dirt, grease or oil present
on the operator’s platform. Keep all the signals, lanterns, headlights and decals
clean and clearly readable and visible.
13. Observe the following safety measures when refueling the machine:
-
Turn off the engine;
-
Do not smoke or allow others to smoke;
-
Do not allow sparks or flames near the equipment;
-
Level the nozzle of fueling, as well as the fueling nipple.
14. Before performing any maintenance operation, cleat the tamping cylinders and
pull the emergency/parking brake.
15. If the noise level of the machine is superior to 85 dB (A), use proper auricular
protectors. The level of noise can fluctuate according to the kind of work the
equipment is being subjected to.
16. Do not modify the machine under any pretext, because this action can affect
personal safety and equipment safety. Any modification on the machine requires
a previous approval by writing from DYNAPAC.
17. Always keep the doors closed when operating machinery equipped with cab.
Summary of Contents for DYNAPAC CT3000
Page 2: ...2 4812325559EN 2018 02 20 ...
Page 4: ......
Page 107: ...2018 02 20 4812325559EN 103 ...
