Maintenance - Monthly (Every 250 hours of operation)
2018-02-20
4812325559EN
77
Monthly (Every 250 hours of operation)
Check the conditions and tightening of the bolts
and cushion of the cabin or operation platform
1. Carry out a visual inspection of the cushions, brackets and
dampers of the cabin or the operation platform. If necessary,
replace them.
2. Tighten the fixing bolts again, if necessary.
3. Tighten all bolts and nuts of the cabin's accessories again
(rear view mirrors, caps, A/C, etc).
If the machine operates under severe conditions,
replace the cushions if their rubber or spacer is
damaged.
Check the transmission box oil level
4. Turn the steering wheel completely to the right, to allow better
access to the level display.
Keep personnel away from the chassis joint
while
executing
this
operation:
risk
of
accidents.
5. Check the oil level, with the engine working in low idle and
the transmission warmed up at 176 °F (80 °C), and through
the display located on the left side of the machine.
6.
Oil should be at the designated level of the display. If it’s
below this mark, fill with the recommended oil.
Fig.
– Cushion of the cabin
Fig.
– Transmission box oil level
Summary of Contents for DYNAPAC CT3000
Page 2: ...2 4812325559EN 2018 02 20 ...
Page 4: ......
Page 107: ...2018 02 20 4812325559EN 103 ...
