Fayat DYNAPAC CT3000, Instruction Manual

Page: 60 / 108

Maintenance
– Maintenance and lubrication procedures
56 4812325559EN 2018-02-20
Lubrication and maintenance procedures
Maintenance and lubrication procedures should be made based
on the number of operation hours, than subsequently based on
the periods, as daily, weekly, etc.
Always clean around the caps, grease trays or plugs
before opening or applying grease.
Observe and follow the engine manufacturer
instructions. For further information, refer to the
Engine Manual.
DAILY (Every 10 hours of operation)
ITEM ON
PAG. 52
PROCEDURE PAGE
Before starting the engine
18 - 21 Check the brakes 58
12 Check the scrapers adjustment 59
9 Check the tire pressure 60
17 Check the tightening of the wheel bolts 60
5 Check the hydraulic oil reservoir oil level 61
22 Check the alignment of the cab cushions 61
1 Check the engine's coolant level 62
14 Check the engine's lubricant oil level 62
2 Check the tension on the alternator's belt 63
3 Check the pre-filter's water divider 63
20 Check the transmission box oil level 64
-
Check the Multi-function display and the operator's
control keyboard
64
At the end of the work shift
11 Refuel the fuel tank 65
22 Check the cabin's cushion height 65
28 Check the exhaust gases post-treatment connecting
line (Tier IV Engine) 66
4 Clean the dust ejector valve (Tier IV Engine) 66