Fayat DYNAPAC CT3000, Instruction Manual

Page: 83 / 108

Maintenance - Monthly (Every 250 hours of operation)
2018-02-20 4812325559EN 79
Check and clean the radiator
1. Make sure that the air flow is freely passing through the
radiators, without any obstructions. In case the hives are
dirty, wash them with running water (with the engine off) and
clean them with pressurized air.
Every time you are using the pressurized air, you
must wear safety goggles.
Whenever possible, clean the hives in the
opposite direction of the fan air flow. Always
cover the electric and electronic components
during the washing of the hives.
In more severe temperature environments and
dust , reduce the frequency of cleanings.
Whenever possible, clean the hives in the
opposite direction of the fan air flow. Always
cover the electric and electronic components
during the washing of the hives.
Replace the lubricant oil and the engine oil filter
Never perform maintenance under the machine
when the engine is running. Always park the
machine on a leveled ground and shim the cylinders.
1. Make sure that the roller is on a leveled ground and the
parking brake is applied, then open both the engine side
covers.
2.
Open the cap of the oil filler nozzle (1).
3.
Clean the area around the refueling plug.
4.
Remove the drainage plug (2) located behind the rear axle,
at the right side of the machine, then drain the crankcase oil
in a proper container.
Used oil is harmful to the health. Avoid contact with
the skin for long periods of time and wash your
hands thoroughly with water and soap after
handling.
TAKE CARE OF THE ENVIRONMENT: All used
oil shall be collected and stored properly for
recycling. Don’t discard oil on the soil,
sewerage system or any other location that
can harm the environment.
Fig.
– Engine's lubricant oil
drainage plug and cap
1
Fig.
– Radiators
2