Fayat DYNAPAC CT3000, Instruction Manual

Page: 31 / 108

Emergency procedures
2018-02-20 4812325559EN 27
Exhaust System Cleaning Lamps
High Exhaust System Temperature (HEST) Lamp
May illuminate due to higher-than normal exhaust temperature
during Exhaust System Cleaning. Operator should ensure that
the exhaust pipe outlet is not directed at any flammable or
combustible surfaces.
Exhaust System Cleaning Lamp
Illuminates when the exhaust system is unable to complete an
automatic Exhaust System Cleaning event. Operator should
ensure the
Exhaust System Cleaning Switch is not in the “STOP” position
and
continue working until there is an opportunity, such as at the end
of the
work day or shift, to complete a stationary Exhaust System
Cleaning.
Exhaust System Cleaning Lamp With Check Engine Lamp
If an Exhaust System Cleaning is not performed in a timely
manner after the Exhaust System Cleaning Lamp is illuminated,
the Check Engine
Lamp will illuminate and engine power will be significantly
reduced. Park
the equipment when safe to do so, and press the Exhaust
System
Cleaning Start Switch. Once the cleaning is complete, full engine
power
will be restored.
Exhaust System Cleaning Lamp
Flashes when a stationary Exhaust System Cleaning event is
initiated
using the Exhaust System Cleaning Start Switch. This lamp will
continue
to flash until the stationary cleaning event is complete. Once the
lamp
turns off, the operator can resume normal work activity.
Exhaust System Cleaning Stop Lamp
Illuminates when the Exhaust System Cleaning Switch is in the
“STOP”
position, preventing a cleaning event. This switch should be
used only
when high exhaust temperatures present a hazard. Excessive
use of the
Exhaust System Cleaning Switch in the “STOP” position will
result in the
need for more frequent stationary exhaust cleaning events.