background image

 

 

 

- 7  

 

FASTCORP (“SELLER”) TERMS AND CONDITIONS OF SALE 

1. PRICES.  All  prices,  quotations,  shipments  and  deliveries  by  Seller  are  F.O.B.  Seller's  facility.  All  base  prices  are 
subject to change upon thirty (30) days notice and all orders are accepted subject to Seller's price in effect at the time of 
shipment. 
2. APPLICABILITY, ACCEPTANCE AND MODIFICATION. These terms and conditions apply to all quotations and 
purchase orders covering the sale of Seller's products or services. Seller's acceptance of Buyer's order is expressly made 
conditional  on  Buyer's  acceptance  of  the  terms  and  conditions  set  forth  herein.  The  terms  and  conditions  set  forth 
herein constitute the complete agreement between the Seller and the Buyer, and may be accepted only in accordance 
with  their  terms.  They  may  not  be  modified  except  by  written  agreement  referring  specifically  to  these  terms  and 
conditions  and  signed  by  a  duly  authorized  officer  of  Seller.  Any  provisions  of  Buyer's  purchase  order  which  are 
inconsistent with the foregoing shall be of no force and effect, unless Seller shall have agreed to a modification of these 
terms and conditions in the manner set forth herein. Buyer's failure to dissent from the terms and conditions, or Buyer's 
acceptance or use of the Seller's equipment shall constitute Buyer's acceptance of these terms and conditions. Buyer, by 
these presents and the acceptance of the goods ordered herein represents and warrants the Buyer is solvent and able to 
pay  for  the  goods  in  accordance  with  these  terms  and  conditions  of  sale.  Any  order  accepted  by  Seller  shall  not  be 
assigned, sold or otherwise transferred by Buyer unless Seller expressly agrees in writing to such sale, assignment or 
other transfer. 
3. DELIVERY AND DELAYS. Seller's obligation is to deliver the goods F.O.B. Seller's facility. Risk of loss passes to 
Buyer at the moment of delivery. Buyer will inspect the products within a reasonable time after receipt thereof and if 
Buyer  fails  to  notify  Seller  within  thirty  days  after  receipt  that  the  products  are  defective  in  any  respect,  Buyer  will 
have waived any rights or claims against Seller. Orders for products made to Buyer's specifications are not subject to 
cancellation  by  Buyer.  Products  made  to  Buyer's  specifications  must  be  inspected  and  accepted  by  Buyer  before 
shipment.  After  shipment,  Buyer  shall  have  no  rights  or  claims  against  Seller  for  such  products.  Delivery  dates 
appearing on Seller's order acknowledgment, or given to Buyer in any other manner, are approximate. Seller will not be 
liable for any delay in the performance hereof or for any damages suffered by Buyer by reason of such delay it caused 
or  by  the  occurrence  of  any  contingency  beyond  the  control  of  Seller  including,  but  not  limited  to,  delays  or  non 
delivery  arising  directly  or  indirectly  from  fires,  floods,  substantial  damage  to  its  plant,  accidents, riots,  acts  of  God, 
open  hostilities,  declarations  of  national  emergencies,  war,  terrorist  acts,  governmental  interference  or  embargoes, 
strikes, labor difficulties, shortage of labor, fuel, power, materials or supplies, or any other cause or causes (whether or 
not  similar  in  nature  to  any  of  those  herein  above  specified)  beyond  its  control.  Seller  shall  allocate  production  and 
deliveries among Seller's customers in its sole discretion. 
4. STORAGE. In the event that Buyer is unable to accept delivery of parts or equipment at the time of completion and 
of shipment, Seller may invoice for the total purchase price as if the shipment has been made and; (i) if Seller is able to 
store such equipment in its own facilities, the Buyer shall pay Seller reasonable handling and storage charges  for the 
period of such storage; or (ii) if Seller is unable to store such equipment in its own facilities, Seller reserves the right to 
arrange  handling  and  storage  in a  suitable  warehouse  for  the  Buyer,  at  the  Buyer's  expense.  In  cases  where  handling 
and storage become necessary, it will become the responsibility of the Buyer to notify Seller  when shipment is to be 
made and to what destination. 
5. ADEQUATE ASSURANCES. Seller may, at any time, suspend performance of any order or require payment from 
Buyer  in  cash,  security  or  other adequate  assurance  satisfactory  to  Seller  when, in  Seller's  sole  opinion, the  financial 
condition of Buyer or other grounds for insecurity warrant such action. 
6.  TAXES.  Any  tax  which  the  Seller  may  be  required  to  pay  or  collect,  through  assessment  or  otherwise,  under  any 
existing  or  future  law  upon or  with  respect  to  the  sale,  purchase,  delivery,  transportation,  storage,  processing,  use  or 
consumption of any goods or services provided by Seller to Buyer, including taxes upon or measured by the receipts 
from sales or services, shall be for the account of Buyer and may be added to the price of goods or services purchased 
by Buyer. Buyer shall promptly pay the amount thereof to Seller upon demand. 
7. LIMITED WARRANTY. 
(A).  Subject  to  the  limitations  specified  herein,  the  EVOLUTION  FS-01  and/or  EVOLUTION  FS-02  Frozen 
Merchandisers manufactured by Seller is warranted for two (2) years from the date of purchase against defective parts 
and  workmanship  and  the  EVOLUTION  FS-01  and/or  EVOLUTION  FS-02  Frozen  Merchandisers’  freezer  system 
consisting  solely  of  the  compressor,  condenser,  evaporator  and  the  refrigerant  tubing  is  warranted  for  two  (2)  years 
from the date of purchase against defective parts and workmanship. Any part or parts which are proven to be defective 
within  the  applicable  warranty  period  will  be  repaired  and/or  replaced  free  of  charge,  provided  that,  (i)  the  return  of 
such part or parts is authorized in writing by Seller's Warranty Department (the "Return  Authorization"), and (ii) the 
defective part and a copy of the Return Authorization is returned with transportation charges prepaid to the destination 
designated by Seller's Warranty Department. All labor charges shall be for the account of Buyer. 
 
 
 
 

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | + 561-391-7200

Summary of Contents for EVOLUTION FS-01



































































Reviews: