- 47
The Display will change to read:
BOOT LOAD xxx
Out of Service
PROGRAM REVISION UPGRADE: (Firmware after Revision V119K)
12. The MICRO SD Card should still be in the Daughter Board slot. Gently,
press down, again, on the Micro SD card so that it locks into the slot. The Display
will scroll between the options on the Micro SD Card menu:
1- Load Config.
2- Save Config.
3- Load Firmware
4- Save DEX Sales
Use the “*” key to scroll through the menu and enter “3” to load new firmware.
13. Use the asterisk “*” key to scroll through the contents of the Micro SD card.
There may be more than one program version contained on the card. Use the “*”
key to scroll to the latest or highest number version.
•
The program version will be displayed in the “FC0xxxy.bi2” format,
where “xxx” is the numeric revision number and “y” is the alphabetic
revision suffix. For example, FC0120F.bi2.
14. Press the pound (#) key to enter the selection. The Display will read,
“Programming”. An LED status light on the right side of the VMC Board will start
flashing rapidly. When the process is complete, the display will read, “UPDATE
SUCCESS. Remove card…”
15. To remove the Micro SD card, press down gently on the top. It should slide
up slightly allowing you to grasp it between your fingers. Lift the SD card straight
up and out.
Notes -
•
Power does NOT have to be turned “OFF” to remove the SD card.
•
The vacuum may produce a clicking sound during this procedure.
This is normal and is not a concern.
•
A major firmware upgrade may require the Robot Arm to be re-
calibrated. Please refer to the section, “Calibrating the Robot Arm”
in your manual. Scroll to Service Menu Option “4) Create
Selection”, Press “#” and follow the prompts to calibrate the Robot
Arm.
•
Your programming data should have been saved to your Micro SD
card and automatically reinstalled with the program upgrade. Test-
vend selections to confirm accuracy. Go to Service Menu 3) Edit
Selection to make adjustments if necessary.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | + 561-391-7200
