- 32
3) EDIT SELECTION –
Allows you to change the price, edit bin location or add
multiple chained bins to a single selection.
Display
Programming Instructions
3) EDIT SELECTION
* = Next
D = Back
# = Yes
a) Press the #=Yes key. The robot will
go to the delivery point and the freezer
lid will open.
ENTER SELECT
#
# -
Exit
b) Enter selection number to be edited.
A1 Price:
1.00
*=Exit
#=Accept
c) Type over the price and press the “#”
key.
A1 Move The Robot
*=Cancel
#=Accept
d) Adjust the position of the robot over
the bin. Press “#” key to save the bin
location.
Bin Height: Tall
*=Change
#=Accept
e) Select Tall or Short by pressing the
*key. Press # to accept.
More Bins?
*=No
#=Yes
f) Press the #=Yes key to add additional
(chained) bins or press * to exit menu.
4) CREATE SELECTION -
Create new selections, with the ability to chain
multiple bins to a single selection.
NOTE: WHEN POSITIONING THE ROBOT OVER A BIN, THE ELBOW
SHOULD POINT TO THE OPPOSITE SIDE OF THE FREEZER FROM THE
BIN. EXAMPLE- IF THE BIN IS LOCATED ON THE LEFT SIDE OF THE
FREEZER THE ROBOT ELBOW SHOULD POINT TO THE RIGHT SIDE AND
VICE VERSA.
*** BINS NEAR THE CENTER OF THE FREEZER SHOULD BE
PROGRAMMED WITH THE ELBOW POINTING TO THE RIGHT SIDE***
Fig. 10 Robot Arm Positions - Programming
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | + 561-391-7200
