- 46
6. We recommend that you also save your DEX data. Push down on the Micro
SD card again while it is still in the slot and when the scrolling display again
appears, enter “4” to save and name your DEX file(see Fig. 12).
7. Major Program Upgrades may require a Boot Loader Upgrade in addition to
the Program Upgrade. Check with Fastcorp Service to determine if the boot
loader upgrade is necessary. If it is not necessary, skip to instruction number 12.
Note: Reinstalling the Boot Loader will not have any affect on the Boot Loader or
Program Upgrade.
BOOT LOADER UPGRADE: (Firmware after Revision V119K)
8. The MICRO SD Card should still be in the Daughter Board slot. Press down
on the card as before. The Display will scroll between the options on the Micro
SD Card menu:
1- Load Config.
2- Save Config.
3- Load Firmware
4- Save DEX Sales
Use the “*” key to scroll through the menu and enter “3” to load new firmware.
9. Use the asterisk “*” key to scroll through the contents of the Micro SD card.
There may be more than one program version contained on the card. Typically
there will also be a boot loader program. Use the “*” key to scroll to the latest or
highest number version of the boot loader.
•
The boot loader version will be displayed in the “BOOTVxxx.bi2”
format, where “xxx” is the numeric revision number. For example,
BOOTV232.bi2.
10. Press the pound “#” key. The Display will read:
PROGRAMMING
BootVxxx.bi2
An LED status light on the right side of the board will start flashing rapidly. When
the process is complete, the display will read:
Update success.
Remove card…..
11. Do not remove the Micro SD card. Press down gently on the top and let go.
The card will slide up slightly in the sleeve. Leave the Micro SD card in the slot.
The Display will read:
BOOT UPDATE xxx
Done!
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | + 561-391-7200