manualshive.com logo in svg

Farymann Diesel 15B Series, Operator'S Manual, Page: 76 / 110

Share
Download
Farymann Diesel 15B Series Operator'S Manual Download Page 76

 

Diesel engine Series 15B / 18B 

Maintenance 

 

 

 

76  

2008-09-08

 

 

  

 

Fig. 64 

4. 

Check filter material (3) depending on occurrence of dust. In 
the case of severe contamination dismantle filter and wash 
out in diesel fuel or replace complete oil bath air cleaner. 

 

 

NOTE! 

Before assembly of the filter let the diesel fuel drip 
off sufficiently or wipe off. 

 

 

 

 

NOTE! 

Do not pull out the filter material (3) from the filter 
case. The filter must be completely dry before 
fitting. 

 

 

 

 

 

 

 

Fig. 65 

5. 

Fill oil container up to marking (4) with engine oil (use oil in 
accordance with the viscosity classes on page 27). 

6. 

Fix oil container to the filter, whilst doing so make sure the 
filter sits correctly, and close both fasteners. 

 

 

Pos: 8.28 /KN2006-SM/nL---------- Abschnittsende ---------- @ 8\mod_1141997892953_0.doc @ 75473 

 

 

Pos: 8.29 /KN2006-Projekte/Bukh-Farymann/Wartung/1.1 

Ventilspiel einstellen  6600 @ 65\mod_1207232952990_2.doc @ 1131006 

 

Summary of Contents for 15B Series















































































































Reviews:

No comments