46
111628W
Revision date: 09.25.18
Quick Start Guide: Supply Manifold Photo & Diagrams
ATTENTION: See Pages 35-38
for additional details.
106808 Pipe
Hanger
Slide the 106808
hanger onto the Tek
screw and attach to
the frame.
Hanger locations
are circled in the
diagram below.
2. Attach supply tubes to manifold.
3. Slide tube ends into 111030 end caps.
1. Attach hangers and manifold to frame.
Supply Manifold
STAND-ALONE UNIT
ONLY—
If you are attaching
the main water line at the
bottom, slide manifold up
during installation to provide
the needed clearance, or
trim to length as needed.
Trim the top of the manifold
if desired and secure
WF2990 slip cap in place
with pvc primer and cement.
See Page 3 for details.
CONNECTING MULTIPLE SYSTEMS—
See the information on Page 4 if attaching the
water supply line to multiple fodder systems.
If the water main is attached to
the top of the manifold, install
the WF3311 ball valve at the
bottom. See Page 4.
W
ALL
112305
112306
W
ALL
