22
22
111628W
Revision date: 09.25.18
1
Assembly Instructions
1. Attach one 111628SC corner brace to each outer
corner of the assembled and anchored frame.
NOTE:
These braces include pre-drilled mounting
holes that mirror the spacing of the individual
levels.
If the holes do not match the spacing of
the shelves, flip the brace end-for-end.
Use the
diagram in the Quick Start section to verify spacing of
shelves if needed.
2. Continue by leveling the mid support arms.
ASSEMBLE MAIN FRAME: Install Corner Braces
IMPORTANT:
At the middle support position, measure the shelf spacing and install
a second Tek screw through the 3-way fitting and into the support arm. This will
prevent movement and help to maintain the correct spacing once the fodder system
is in production. See diagram in the Quick Start section for shelf spacing.
See the
next procedure to level the mid support arms.
8 1/4"
between
base & arm
Tek
Screw
Tek
Screw
10" between
support arms
Corner brace
installed flush with
bottom of frame
.
1
11628SC
Corner
Brace
1
11628SC
Corner
Brace
ATTENTION:
Install corner braces flush
to the bottom of the main
frame
. Measure to ensure that the space between the different
levels is as shown in the diagrams. Lift or press down to adjust
the free end of each support arm as needed before you attach the
corner brace. All support arms must be level and spaced according
to the diagram on Page 42.
FA4482B
Tek Screw
Middle
Support
