2
111628W
Revision date: 09.25.18
READ THIS DOCUMENT BEFORE YOU BEGIN
Thank you for purchasing the 111628W FodderPro 2.0 Full Feed System – Wall Mount. When properly assembled and maintained, this product will provide
years of reliable service. This guide includes information needed to safely assemble and maintain the system. Read these instructions
before
you begin.
Important Information
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the fodder system.
Additional tools and
supports may be needed.
• Tape measure and marker
• Variable speed drill (cordless with extra batteries
works best) and drill bit set with a 9/32" & 7/16" bit.
• Small hammer and gloves
• PVC Tube Cutting Tool
• Level 4' (or longer)
• Wrench set or adjustable wrenches
• Socket Set with Ratchet
• Straight Screw Driver
• 1-3/8" hole saw bit for the drain manifold
• Adjustable pliers
• 5/8" nut driver (or 5/8" socket)
• Ladder or work platform to work at the height of
the fodder system frame.
ASSEMBLY PROCEDURE
This manual describes how to assemble a single
111628W FodderPro 2.0 Full Feed System – Wall
Mount.
The steps outlining the assembly process
are as follows:
1. Unpack the contents of the shipment and
place where you can easily inventory the
parts. Refer to the Bill of Materials/Spec
Sheets.
2. Verify that all parts listed on the Bill of
Materials/Spec Sheets are present. If anything
is missing or you have questions, consult
the Pictorial Parts Guide and all diagrams for
clarification, or contact Customer Service.
3. Read these instructions and all additional
documentation included with the shipment
before
you begin.
4. Gather the required tools.
5. For best results, assemble the components
in the order they are presented in these
instructions.
SAFETY PRECAUTIONS
• Wear eye protection.
• Wear gloves when handling metal tubes.
• Use a portable GFCI (Ground Fault Circuit
Interrupter) when working with electric power tools
and cords.
QUICK START GUIDE
For a quick overview of this product and its
components, consult the Quick Start Guide at the
back of these instructions.
ATTENTION:
This manual describes how to
assemble one 111628W FodderPro 2.0 Full Feed
System – Wall Mount. If you are connecting this
system to another, minor adjustments must be
made to some of the procedures that follow.
Consult the diagram on Page 4 for additional
details regarding multiple systems.
ELECTRICAL WARNING
Fodder frame is metal and will conduct electricity!
Exercise caution if working around or on the
frame with electric power tools.
Use cordless,
battery-power tools.
CONSULT THE SERVICES OF A QUALIFIED
ELECTRICAL TECHNICIAN WHEN INSTALLING
ANY PUMPS, ARTIFICIAL LIGHTING,
OR OTHER ELECTRICALLY POWERED
ACCESSORIES.
OPEN SYSTEM
The 111628W FodderPro 2.0 Full Feed System
– Wall Mount is an open system, which means
that the water is not recycled for use
in the
fodder system
. Unlike a closed system where
the water is stored in a reservoir and recycled,
the open system requires a water source
and a drain to accept the unused water. The
unused water can be recycled for use in other
applications such as watering other plants;
however,
to promote healthy fodder growth
,
it is not recommended for reuse in the fodder
system.
WARNING:
This is not a free-standing
frame! You must secure the frame to the wall
using the appropriate fasteners and supplied
brackets. Contact the services of a qualified
contractor for assistance if needed, or call your
sales representative for additional fastener
information and to purchase fasteners.
DO NOT USE THE FODDER SYSTEM WHEN
THE FRAME HAS NOT BEEN PROPERLY
SECURED TO THE WALL!
NEVER CLIMB ON THE FODDER FRAME!
