32
32
111628W
Revision date: 09.25.18
3
Assembly Instructions
ASSEMBLE THE DRAIN MANIFOLD — continued
15. Check the end of the tube to verify that it does not extend beyond the frame edge. If desired, mark, remove the tube, and
trim as needed. Remember to allow room for the installation of the WF6717 slip caps at the end of each tube.
16. Remove the tube from the tee fitting. This tube will be the template for all remaining tubes. Verify that it is marked correctly
before you remove it from the fitting.
17. Use a
1 3/8" hole saw bit
and a drill to drill the holes for the drain elbows of each channel. (If possible, drill the holes using a
drill press for accuracy.) Remove loose material from around the holes and from inside each tube after drilling.
Step 15: Verify that tube does not
extend beyond the edge of frame.
Remove tube before drilling holes.
23"
Center Line
Tee Fitting End
