7
Revision date: 09.25.18
111628W
Important Information
SPECIAL NOTES AND CAUTIONS
The support frame for the 111628W FodderPro 2.0 Full Feed System –
Wall Mount is designed to save assembly time and to better serve your
growing needs. Before you begin, read the information that follows.
CAUTION!
DO NOT CLIMB ON FRAME!
TO PREVENT INJURY AND POSSIBLE DAMAGE TO THE
FODDER SYSTEM AND RELATED COMPONENTS, NEVER
CLIMB ON THE ASSEMBLED OR PARTIALLY ASSEMBLED
FRAME.
NEVER USE THE FRAME ENDS AS A LADDER TO REACH THE
UPPER LEVEL OF THE FODDER FRAME!
FRAME IS NOT A FREE-STANDING FRAME! IT MUST BE
SECURED TO A WALL BEFORE OPERATION.
AFTER FRAME SLOPE IS SET, ANCHOR THE FODDER FRAME
TO THE WALL AS INSTRUCTED IN THIS GUIDE. DO NOT USE
THE FODDER SYSTEM IF THE FRAME IS NOT PROPERLY
ANCHORED TO THE WALL.
CONSULT THE SERVICES OF A QUALIFIED CONTRACTOR
FOR IF NEEDED TO PROPERLY ANCHOR THE FRAME.
ATTENTION:
CONSULT ALL DIAGRAMS AND THOSE NEAR THE
BACK OF THIS GUIDE TO IDENTIFY CRITICAL DIMENSIONS, PART
NUMBERS, AND PART LOCATIONS FOR THE FODDER FRAME.
Diagram above shows the end frame view of your 111628W
FodderPro 2.0 Full Feed System – Wall Mount.
