29
Revision date: 09.25.18
111628W
5. Next, attach the 111907 conduit hangers to the wall in the
locations shown.
3
Assembly Instructions
NOTE:
Due to the many different possibilities for wall
materials, the fasteners to secure the conduit hangers
to the wall must be supplied by the customer. Contact
a contractor or your sales representative to purchase
fasteners that are appropriate for your wall.
6. Once the pvc cement sets, take the assembled center
stack and attach it to the wall conduit hangers. See
FIG. 3.
NOTE:
Align the open end of the tee fitting
approximately 1/4" inch below the support arm at each
level. This will be adjusted later. See dashed line in
FIG. 3. Slight variations will not affect the installation of
the remaining drain tubes.
7. At this time, tighten two of the 111907 clamps to hold
the stack in position.
FIG. 2: Attach 111907 to wall.
FIG. 3: Install drain manifold stack.
ASSEMBLE THE DRAIN MANIFOLD — continued
W
ALL
W
ALL
W
ALL
Fodder
Frame
Distance depends on
channel position on the
frame. Typical dimension is
approximately 12".
FIG. 1: Top View
111907
