20
20
111628W
Revision date: 09.25.18
3. After setting the end-to-end slope, use a level at the base rail to level the frame side-to-side. Repeat all base rails to properly level the frame.
NOTE:
Depending on the floor surface and how plumb the wall is, additional steps and materials may be needed to level and anchor the frame to
the wall without disturbing the adjustments. See the diagrams on this page for an example.
4. Recheck the slope (end-to-end) to ensure it has not changed.
1
ASSEMBLE MAIN FRAME: Level and Secure Frame to the Wall (continued)
Assembly Instructions
W
ALL
Level
Side-to-Side
Level
Finished Grade
ATTENTION:
It is important to anchor a
fodder frame that is level (side-to-side)
and properly sloped (end-to-end). If the
wall is not plumb, add wood blocks or
other material between the wall and wall
mounts of the fodder frame and then
secure the frame to the wall using the
112322 brackets.
Level
Side-to-Side
W
ALL
Finished Grade
