3.
14
(MT13 - En 2015)
TD2100PL
. Profilo series steel push-button
panel with 14 buttons and alphanumerical LCD.
Used to dial and send calls over DUO digital
line.
Technical features
Power supply from audio/video module
Door-opening time
3/6 seconds
LCD
2 lines x 16 characters
Number of calls
200
Memory
250 names
Dimensions
1 module
Operating temperature
0°
÷
+40°C
Maximum humidity acceptable
90% RH
Terminals
LP/LP audio-data-video to and from inter-
nal users
P1/P1 direct call button inputs
EC
positive signal for auxiliary service
EM
negative signal for auxiliary service
S1/S2 door opening contacts
1
2
3
4
5
6
7
8
9
0
DIGITAL PUSH-BUTTON PANEL
PROGRAMMING
Before programming you must:
Press the button PROG on the back of the
push-button panel using a small screwdriver;
the displays shows “Programming / type: “.
Dial the programming code (see table 3.3)
and press
to confirm.
Once you have programmed each code, press
the button PROG again; the display shows
“FARFISA / dial the number or press
” or
the text set during the programming phase
(see “Personalisation of display initial
text”).
Entry of codes for door lock (code 00)
Enter the programming mode and insert code
00 to access the “entry of codes for door
lock” mode; the display shows "PASSWORD
0 / ".
Dial the first opening code on the keypad, for
example 7890; the display shows “PASS-
WORD 0 / 7890”.
Press
; the display shows “PASSWORD 1
/ ”.
Dial the second opening code on the keypad,
for example 1234; the display shows
“PASSWORD 1 / 1234”.
Press
; the display shows “PASSWORD 2
/ ”.
Repeat the operations to insert max. 16 codes;
when you press the button
to confirm the
sixteenth code (PASSWORD 15) the display
shows “Programming / type: “.
Continue by entering the code of a new pro-
gramming function or press the button PROG
to exit.
Fixing of frame to rain shelter.
Align the frame before
tightening the screws.
Fixing of the module frames on the upper side
by the 2 small screws included in the rain
shelter.
Fix lower part of the
frame to the rain shelter
and make the electrical
connections.
Rain shelter
DOOR STATIONS
Table 3.3
Programming codes
00 Entry of codes for door lock
01 Entry-modification-deletion of names
02 Language selection
03 System programming
04 Entry of display initial text
05 Loading names from PC
06 Ordering names
10 Address door station (PE)
11 Address button P1
12 Address associated with EC-EM termi-
nals
30 Settings for operations with a doorkeeper
exchanger
Codes to deactivate the camera upon call
of 2 user groups
20 First address in group 1
21 Last address in group 1
22 First address in group 2
23 Last address in group 2
