4.
30
(MT13 - En 2015)
Operating instructions
Power-OFF
Keep pressed the
button until the doorkeeper exchanger switches
OFF or when the “device manager” menu appears select power “OFF”
and then press
. Already stored bookings will not be lost.
Power-ON
Keep pressed the button
for some seconds, the doorkeeper
exchanger powers ON and starts to operate according to the previous
settings.
Device manager
When the doorkeeper exchanger is ON, pressing shortly the button
to display the “Device Manager” menu; in the menu are listed the
following functions: Power-OFF, keypad lock, ringer tones OFF, ringer
tones ON and software release.
Keypad lock
Activating this function, the keypad of the doorkeeper exchanger is
locked, it is only possible answer to the incoming calls from door
stations or internal users. In “Device Manager” menu select “keypad
lock” and press
; on the display will appear
. To unlock the
keypad press for several seconds the button
.
Ringer tones OFF and ON
To set OFF (or ON) all the ringer tones of the doorkeeper exchanger it
is necessary: - access the menu “Device Manager” by pressing shortly
the button
- select “Silent” - press
; LED
will light-ON. To
activate again the ringer tones select “Ringer ON” and press
; LED
switches-OFF.
Release Software
To display the software release of the doorkeeper exchanger select
“release” and press
. To exit this page press
.
A
J
T
G
P
W
D
M
B
K
U
H
Q
X
E
N
C
L
V
I
R
Y
S
Z
F
O
1
4
7
2
5
8
0
3
6
9
- OFF
Keypad lock
Silent
Device Manager
OFF
Silent
- Keypad lock
Device Manager
21.09.11
11.06
A
J
T
G
P
W
D
M
B
K
U
H
Q
X
E
N
C
L
V
I
R
Y
S
Z
F
O
1
4
7
2
5
8
0
3
6
9
21.09.11
11.06
OFF
-
Silent
Keypad lock
Device Manager
Keypad lock
Silent
- Ringer ON
Device Manager
Connection of a local calling button (bell function)
Connecting a button (FP) between terminals A1
and GN it is possible to enable the doorkeeper
exchanger ringing with a different ringing tone and
without engaging the doorkeeper exchanger itself
(only bell function).
Connection of a supplementary ringing bell or a lamp signaler
for the incoming calls
By applying a self-powered ringer
between terminals C and NO it is
possible to drive to another room the
calls received by the doorkeeper
exchanger.
- Contacts C and NO of the relay are
open in idle state and closed in
activation mode.
- Contacts C and NC of the relay are closed in idle state and open in
activation mode.
It is possible to program the ON time of the relay, acting in the proper
submenu in the “advanced settings” menu.
FP
GN
A1
NO
NC
C
GN
A1
NO
NC
C
SERVICE MODULES
PROGRAMMING
For a correct operation of a digital system “DUO”, it is necessary to
program all the devices present in the installation.
Doorkeeper exchanger is programmed from factory with the
address 201. If it is necessary address can be changed following the
instructions reported on the chapter “PDX Address” (see page
4.35).
In all the internal stations a button, pressing which you will call the
doorkeeper exchanger, must be programmed with the same ad-
dress of doorkeeper exchanger (according to the previous example
201); follow the procedure for programming individual internal sta-
tions (see chapter 2).
Program all the door stations to set them for the presence of the
doorkeeper exchanger (see chapter 3).
Operating functions
The doorkeeper exchanger can operate in the following operating
mode: OFF, ON and Direct Call.
Doorkeeper exchanger OFF (night)
Doorkeeper exchanger is not operative while the other devices of the
system still continue to work as intended. All the call directed to the
doorkeeper exchanger will be lost.
Doorkeeper exchanger ON (day)
All the call either originated by the door stations or by internal users are
intercepted by the doorkeeper exchanger except those made by the
secondary door stations which can be managed by a secondary
doorkeeper exchanger (if present in the installation).
Direct Call
Enabling this function all the call originated by the door stations are
diverted directly to the internal users without being intercepted by the
doorkeeper exchanger. Doorkeeper exchanger will handle only the call
from internal users and is able to manage bookings and make an
inclusions to a communication in progress.
