- 34 -
Mi 2478
I
T
ALIANO
E
NGLISH
F
RANÇAIS
E
SP
AÑOL
P
ORTUGUÊS
D
EUTSCH
Back
Actuations
Favourite
buttons
Favourite
buttons
Entrances
Installation
wizard
Installation
wizard
Intercommunicating
Set-up Menu
(first and second page)
Back
Show
settings
Show
settings
Advanced
Default
System
System Menu
Back
Supplementary
addresses
Supplementary
addresses
Room
Forwarding
A1
Forwarding
A1
Address
Use the keys
or turn the wheel sensor to change the page when
on middle bottom page appear 2 or more boxes.
3.4 SET-UP MENU DIAGRAM
Settings
- This menu is reserved exclusively to qualified staff; therefore, it is protected by password; to
access the menu follow the indications given in the main menu at page 33.
Intercom
municating
- Here the user can enter the names and addresses of intercommunication devices
or to modify the data stored previously; to manage these parameters, the user must know the user and
room addresses (if required).
Entrances
- Here the user can enter the names and addresses of external door stations or to modify the
data stored previously; to manage these parameters, the user must know the addresses of door stations.
A tua io
c
t ns
- Here the user can enter the names and addresses of actuators or to modify the data stored
previously; to manage these parameters, the user must know the addresses of actuators.
Installation wizard
- This procedure enables simple setup of parameters that are essential for the
operation of the device. The procedure is enabled automatically at first power-ON or it can be run later
via this menu.
Favourite buttons
- In this menu the user can assign direct functions to any of the 6 keys located to the
side of the screen; direct functions are assigned through factory setting only to the 2 keys on bottom
right (second door opening) and left (silent).
System
- Here the user can set the specific parameters of the system.
- Return to previous page.
Back
Show settings
- List of all actual settings.
Advanced
- Procedures and information protected by password that can only be accesses by Aci Farfisa
technical service.
Default - It enables resetting the factory settings of the device; if there are any intercommunicating
devices, external door stations and actuators programmed, such entries will not be deleted.
- Return to previous page.
Back
User address
- This is the address that enables the video intercom to receive the call coming
from external door stations from door keeper exchangers or other internal intercommunicating
stations. For further information refer to chapter 3 “Programming”.
Room
- This is the address that enables identifying the intercommunicating devices installed in
the same apartment; therefore, devices that have the same user address, but installed in
different rooms. For further information refer to chapter 3 “Programming”.
Supplementary addresses
- The additional addresses (maximum 10) are further addresses to
which the device should answer beside its own.
Forwarding A1
- Enables or disables redialing floor call (doorbell) to other devices installed in
the same apartment or running advanced functions.
