Fantic Motor 125 Series, Owner'S Manual

Page: 72 / 130

74
To obtain smooter braking action, turn the ad-
justing screw IN DIRECTION (-); acting inversely-
(+) to obtain a biggest braking action.
!"#$%%&'()'*#++#,)-
./0!12'340!2155647'8.9/5:017:'
The spring preload adjustment requires removal
of the air manifold and use of a specific pin wrench
- Loosen the locking screw of the ring nut (2)
- Tighten the locking screw of the ring nut (2).
- By using a hook wrench or an aluminum punch
turn the adjusting ring nut (1) to the desired
position by reloading or not the spring in rela-
tion to your weight and riding style.
Standard setting: 16 clicks from fully closed
To obtain gentler braking, turn the adjusting ring
nut in the direction (S); reverse the direction (H)
to obtain harder braking action.
To restore the standard setting, turn the adjust-
ing device anticlockwise and then turn back for
the number of turns indicated above.
RB
2182;<=11>'5/5!175647
For maintenance intervals, see page 61 (PERI-
ODIC MAINTENANCE CHARTS) under:
- Rear damper/shock absorber.
:?%'"%(";,?%%+')@)A%B)C#B'$#B)C)D)'#*-
- a damper/linkage unit.
:?%'@BCD'C)'$#BB%$D%&-
- at the top (damper head) to the frame;
- at the bottom (linkage) to the rear fork.
8.9/5:017:'4E'.80!12'5!267F'!21>48.
The basic setting of the suspension is done by
E87:63'04:42
. If di ff erent use is required, the
setting may be customised according to the type
of road to travelled.
8.9/5:67F'=G.28/>63'H28I1
Standard setting:
- 15 clicks from fully closed.
To restore the standard setting, turn the
adjusting ring in (+) direction as far as the
fully closed position and then turn back for the
number of clicks indicated above. To obtain
smooter braking action, turn the adjusting de-
vice in direction (-); reverse the direction (+) to
obtain harder braking action.