6) Once the stitching has been completed:
release the control pedal
—> the gear will be released and the brake will become engaged
—> the mechanical sewing parts will stop
—> the presser foot will raise automatically
Cut the two sewing threads and remove the finished article from the work position. Attatch the end of the
thread that exits from the horn tip to the spring (n. 0539) located on the side of the horn, where the
curved horn is being used for Blake stitching.
7) To start a new stitching operation, repeat the sequence described above.
Testing has shown that the noise level for the operator is not over 85 dB(A).
Warning:
While the machine is running, it is absolutely forbidden to remove the protection systems provided
by the manufacturer for the operator’s safety.
9.2. Mod 525N sewing machine electrical layout.
9.3 Mod. 525N sewing machine compressed air / pneumatic layout.
See the next page.
See the next page.
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
