Pellets Stove
8
88
8
Examples of correct installation
Examples of correct installation
Examples of correct installation
Examples of correct installation
1) Installation with hole on the roof for the passage of the pipe using an adequate mineral insulator (rock
wool, ceramic fibre with a density bigger than 80 kg/m
3
). The hole diameter varies from 300 mm, if the hole is
in contact with flammable materials (wood etc.), to 200 mm if in contact with non-flammable materials
(cement, bricks, etc.). This rule is valid also for holes on the wall.
2) Old chimney flue, ducted with an external door for the cleaning.
3) External chimney flue made of insulated stainless steel pipes with double wall, diameter 8-10 cm, well
fixed on the wall.
4) Ducts system of T pipe fittings for easy cleaning without the disassemble of the pipes.
Pic. 9
•
FUEL
FUEL
FUEL
FUEL
Combustible material
Combustible material
Combustible material
Combustible material
Do not use inflammable liquids. Pellets are the only combustible material you can use. You can find different
kind of pellets with different characteristics and quality on sale. We recommend to use pellets of good quality
as that has great influence on the heating capacity and on the residuals of ash. Pellets characteristics are:
diameter of 6-7 mm, maximum length 30 mm, they must be well pressed and little friable, without any
residuals of glue, resin or additive. Not adequate pellets can cause bad combustion, frequent blockage of the
brazier, obstruction of waste pipes, increase of consumption and decrease of heating power, dirtiness of the
glass, increase of ash quantity or unburned granules. Any wet pellets causes bad combustion and bad
functioning of the appliance, therefore make sure you store the pellets in dry rooms but at least 1 meter far
from the stove or any other heating appliance. We suggest you to try different pellets on sale and then
choose those with the best performance. The use of low quality pellets can damage the stove making the
guarantee not granted and the manufacturer not responsible for the damage.