40i P - Installation/Operation - DRO operation - (14/32)
2.5.3
Calculator function
It may be used to carry out mathematical and trigonometric
operations as well as preset the desired axis with the result of
the calculation or import the displayed coordinate values into
the calculator to carry out math operations.
Different types of calculators may be selected at the function
bar: Arithmetic, trigonometric and for square functions.
Numeric calculator. Functions:
+ - x /
Trigonometric calculator. Functions: Sin, Cos, Tan.
Functions:
To Exit the calculator Set an axis with the result or Insert a value into the calculator.
Exit the calculator.
Set one of the axis with the result of the calculator. To do this, access the calculator by
pressing the Calc button of the function bar on the Preset screen.
Enter the value of an axis, PI or 2PI into the calculator.
2.5.4
Simulation / execution special modes:
After completing the data that define a drilling cycle, you can execute the cycle or simulate it to verify that
data entered is correct.
2.5.4.1
Cycle simulation:
The simulation may be seen in the following modes: tool
movement, views and sections or 3D.
Function
Calculator
Numeric
Trigonom
Square
Function
Exit
Set
Insert
Tool movement
Function
Bolt-hole drilling
Linear drilling
Grid pattern drilling
Function Show Graph
View
Tool movement
