40i P - Installation/Operation - DRO operation - (13/32)
2.5.1.5
Go to
:
This function is the alternative to the most commonly used
positioning method consisting in presetting an incremental zero
at a point and moving the axis until the display shows the
desired coordinate. The Go to function may be used to do the
same in the opposite direction, you enter the coordinates of the
target point and the DRO screen shows these values with the
negative sign. The operator must move the axes to zero. The
advantage of using this method is that the operator does not
have to memorize the target coordinates, he simply has to
move the axes to zero.
When presetting a value on an axis, press ENTER to go on to
the next axis and validate the data just entered.
2.5.2
Programs.
Various cycles may be joined one after another making a
program. The programs may be executed, deleted or edited at
will.
Cycle number 0 indicates the end of the program.
Deletes the selected cycle.
Inserts an empty cycle in the current position.
Executes the current program.
2.5.2.1
Execute programs
It will execute the various cycles up to an empty cycle or invalid
cycle (with the 0 number).
The screen shows information about the program and the
current cycle:
ꞏ current step of the program / Number of steps
ꞏ Cycle number and type.
Go back one cycle.
Advance one cycle.
Execute the current cycle.
Function
Go to
