40i P - Installation/Operation - DRO operation - (7/32)
2.3
Machine reference (home) search:
Select axis. A red bar appears on that axis display indicating
that it is waiting for a reference pulse.
Move the selected axis until the DRO detects the reference
mark.
A green checkmark appears next to the axis display when the
reference mark is properly detected (homed) and the axis
display will show the position value preset in parameter "user
offset", (see
Reference
).
This icon indicates that the axis must be homed.
Note:When all the required axes are homed, the DRO automatically leaves the home search mode.
2.4
Tools and references:
2.4.1
Tools:
Change to set tool (diameter and length).
It offers a 15-tool table.
2.4.1.1
Tool change:
It becomes the current tool.
2.4.1.2
Set a new tool in the table:
Select the tool number you wish to set.
Enter the diameter of the tool. Press Enter.
Enter the length of the tool. Press Enter.
Setup
Home search
Change
Tool
Tool Nr.
