40i P - Installation/Operation - DRO operation - (8/32)
2.4.1.3
Tool compensation:
This DRO offers a function for compensating tool radius depending on the machining direction.
Tool compensation on /off in this direction:
Tool compensation on /off in this direction:
Tool compensation on /off in this direction:
Tool compensation on /off in this direction:
When machining pockets, tool radius compensation is activated in two axes at the same time.
Tool compensation on /off for this corner of the pocket:
Tool compensation on /off for this corner of the pocket:
Tool compensation on /off for this corner of the pocket:
Tool compensation on /off for this corner of the pocket:
2.4.2
Reference:
Change part reference (datum), set a new one or search
the center of the part.
There are 100 references or datum points that may be set for
the part when using absolute coordinates (0-99).
Assistant for searching the center of the part by touching on
two sides.
Assistant for setting the part zero (datum point).
Change
Reference
1/2
Origin
