CNC8070
R
EF
. 0402
OF
128
E
RROR
SOLUTIONS
Page 86 of 128
Errors 3000-3999
3011
'Too many axis programmed as probe'
DETECTION
When executing a probing block.
CAUSE
The number of axes programmed in the probing process exceeds the maximum
number of axes of the channel.
SOLUTION
Modify the probing block.
3013
'Braking distance greater than parameter PROBERANGE'
DETECTION
During execution.
CAUSE
The distance needed to brake at the current speed is greater than parameter
PROBERANGE.
SOLUTION
Increase the braking distance (PROBERANGE), or decrease the probing feedrate.
3015
'During block search, the home search is left out'
DETECTION
During execution.
CAUSE
An attempt has been made to search home while executing in dry run.
SOLUTION
Search home outside the program.
3016
'During the block search, the manual mode is left out'
DETECTION
During execution.
CAUSE
A manual mode request has been received during block search.
SOLUTION
Do not try to make a manual mode request during block search or bear in mind the
warning that the manual mode is not active.
3017
'Block search already activated'
DETECTION
During block search.
CAUSE
An attempt has been made to activate block search, but it was already activated.
SOLUTION
Contact your supplier.
3018
'The constant surface speed has not been reached yet'
DETECTION
During execution.
CAUSE
The spindle has not reached the programmed speed.
SOLUTION
The solutions may be:
• Decrease the constant surface speed S.
• Decrease the axis feedrate.
• Program S before and give the spindle some time to catch up speed.
3019
'The feedrate programmed in G95 is too low'
DETECTION
During execution.
CAUSE
The resulting feedrate is too low.
SOLUTION
Increase the feedrate or increase the spindle rpm.
3020
'S has not been programmed in G96'
DETECTION
During execution.
CAUSE
The spindle speed is zero.
SOLUTION
Program a speed.
3021
'The maximum constant surface speed is zero'
DETECTION
During execution.
CAUSE
The maximum spindle speed is zero.
SOLUTION
Program a speed.
3022
'Error when initializing the coordinates of the axes'
DETECTION
During execution.
CAUSE
The coordinates of an axis do not match.
SOLUTION
Contact your Fagor supplier.
3023
'Axes missing in the new coordinate system'
DETECTION
During execution.
CAUSE
While defining the new coordinate system, one of the first three axes of the channel
is not active.
SOLUTION
Activate the desired first three axes of the channel using the instruction #SET AX[ ].
Summary of Contents for CNC8 070
