8
Instruction manual version 1 for software version 4.04
INSTRUCTION MANUAL FOR DAAB EP104 CONTROL BOARD
• Safety
!
Carefully read through this instruction manual in its entirety – it contains important information about safety, installation,
commissioning and use. Particularly important safety information is identified with the symbol
!
in the left margin.
If you fail to follow the safety instructions in this instruction manual, there is a risk of serious damage to property or injury to
animals or people. You should keep this instruction manual in a safe place for future use.
The EP104 or units controlled by the EP104 must not be used unsupervised by children or by persons without sufficient
experience, knowledge or mental capacity, unless adequate instruction has been given by a person with direct responsibility
for their safety.
Children should be properly supervised to ensure they do not play with the installation or the controlled units. This particularly
applies to remote controls.
The EP104 control unit or the accessories recommended by FAAC Nordic AB must not be modified without the express
agreement of FAAC Nordic AB.
Only qualified persons working in their own fields may perform installation, adjustment, commissioning, repair and other
work.
Electrical connections may only be made by qualified electricians, who accept responsibility for the connections.
Follow the safety instructions of the equipment to be controlled by the control unit.
• Safety classification
FAAC Nordic AB has validated the safety circuits in the EP104 to performance level PL = c and Category 2 as defined by SS-
EN ISO 13849-2:2008.
The EP104 is designed with safety edge inputs and an integrated load guard for use in personal safety applications. These
features are designed to meet the requirements of the Machinery Directive 2006/42/EC.
The validation process assumed a technical service life of 10 years or 1 million operating cycles for components in safety
circuits.
FAAC Nordic is unable to guarantee this validation if the technical service life is exceeded for the motor contactors and for
safety edge. For this reason, these components should be replaced before the end of the service life.
Summary of Contents for DAAB EP104
Page 74: ......
