FAAC DAAB EP104, Instruction Manual

Page: 51 / 74

DAAB STYRAUTOMATIK EP104
51
Instruction manual version 1 for software version 4.04
INSTRUCTION MANUAL FOR DAAB EP104 CONTROL BOARD
Programmable output 2
No. Name Range Factory Setting Ref. page
o200 Function of output 2 0 - 4 1 31
0 Disabled
1 Position indicator/Movement/Warning Signal as configured in o210 – o222
2 Presence detection/Direction sensing Signal as configured in o291
3 Lock
4 Alarm output Signal as configured in o230 – o239
o210 Open position 0 - 1 0 31
0 Disabled
1 Constant signal
o211 Mid position 0 - 1 0 31
0 Disabled
1 Constant signal
o212 Closed position 0 - 1 1 31
0 Disabled
1 Constant signal
o213 Movement 0 - 3 0 31
0 Disabled
1 Constant signal in the opening movement
2 Constant signal in the closing movement
3 Constant signal in the opening and closing movement
o214 Delayed switch-off Switch off after the specified
time For example to switch off lighting a specified
time after closing
0.00-9.59min 0.00
o220 Warning time before start 0.00-9.59min 0.00 31
o221 Warning function in combination with o220 1 - 3 1 31
1 Constant signal before timed opening and automatic closing
2 Constant signal before close signal, timed opening and automatic closing
3 Constant signal before all signals
o222 Function during warning time 1 - 2 1
1 Output signal deactivated during warning
2 Output signal as configured in o210-o213
o230 Alarm if there is an error as configured in
o231-o239. The alarm is activated for at least the
time set in this channel.
0.00-9.59min 0.00 31
o231 Alarm for faulty safety edge. Time as in o230. 0 - 1 0 33
0 Constant signal
1 Active
o232 Alarm for error message in display 0 - 1 0
0 Constant signal
1 Active