FAAC DAAB EP104, Instruction Manual

Page: 43 / 74

DAAB STYRAUTOMATIK EP104
43
Instruction manual version 1 for software version 4.04
INSTRUCTION MANUAL FOR DAAB EP104 CONTROL BOARD
• Vehicle detector, d channels
Vehicle loop 1
No. Name Range Factory Setting Ref. page
d100 Use loop 1 0 – 1 0 33
0 Input disabled
1 Input enabled
d101 Loop reading x1 000-999 33
d102 Loop reading x1000 00-99 33
d103 Activation from passing vehicle 000-999 33
d110 Detection limit for a vehicle in the loop 05-99 15 33
d111 Difference between on and off in the loop 00-50 03 33
d120 Loop presence reset 000 and 005-240min 120 33
d121 Fast loop presence reset 00-99 sec 00 33
d131 Compensation for the influence of the door half
operated by motor 1 on the loop in the close
position
00-50 03 33
d132 Compensation for the influence of the door half
operated by motor 2 on the loop in the close
position
00-50 03 33
d140 Safety function in closing movement 0 - 3 1 34
0 Disabled
1 Reversal
2 Stop with automatic restart of automatic closing
3 Stop without automatic restart of automatic closing, wait for new control signal
d141 Safety during run-on time in closing movement 0 – 1 1 34
0 Disabled
1 Enabled and subordinated to d140
d142 Safety function in opening movement 0 - 3 0 34
0 Disabled
1 Reversal to fully closed
2 Stop with automatic restart of automatic closing
3 Stop without automatic restart of automatic closing, wait for new control signal
d151 Loop closing 0 - 1 0 33
0 Disabled
1 Active
d154 Type of closing 0 - 1 1 33
0 Close immediately when loop is clear
1 Continue to fully open, then close
d160 Control function 0 - 1 0 33
0 Disabled
1 Open